Bark Beetle Detection

Ground reports vs. scored stand layers for tracking bark beetle spread

A dirt forest road winding between tall pine trees.

A ground report tells you what one crew saw on one day in one compartment. A scored stand layer tells you where every stand in the monitoring area sits on the red-to-grey progression, updated on a schedule you don't have to staff. Most districts end up running both, but they answer different questions, and mixing them up costs you a harvest window.

What a ground crew actually gives you

Send a tech into a stand and you get ground truth in the literal sense: boring dust at the base of a tree, pitch tubes, gallery patterns under the bark. That's the only way to confirm species and attack stage on an individual tree, and it's still the standard when you need to write up a confirmed infestation for a permit file or a timber sale appraisal.

What it doesn't give you is coverage. A crew can walk maybe a few hundred acres in a day depending on terrain, and the district's monitoring area usually runs to tens of thousands. By the time a report comes back on compartment 14, compartment 22 three ridges over might already be past red-attack and dropping needles, and nobody's been in there since spring cruise.

What a scored stand layer gives you

A scored layer runs the other way. It reads multispectral imagery across the whole monitoring area on a monthly cadence and scores each stand on where it sits in the red-attack to grey-attack progression. The output is a register you can sort: which stands moved from green to red since last month, which ones are already grey and past salvage value, which ones are borderline and worth a crew visit before you write them off.

That register is what lets a district forester prioritize. Instead of flying the whole monitoring area on whatever window the fixed-wing contract allows, or waiting on whichever crew gets to a compartment next, you pull the layer and see the stands that moved. It still needs a crew to confirm what's there. What it changes is knowing which stand to send that crew to first.

Where each one falls short

Ground reports are slow to scale and fast to go stale. A report from six weeks ago on a fast-moving outbreak might already be wrong, and there's no way to re-survey the whole district on demand just to check.

A spectral read gives you a stand-level signal worth checking in person: solid for flagging which stands moved and how far. Species confirmation stays a tech's job, and so does catching a scattered pocket of three or four trees tucked into an otherwise green stand. A sale appraisal or a cost-share application that needs a confirmed call on species and mortality still goes through a crew.

Running them together between survey windows

What actually hurts salvage planning is the stretch between aerial survey flights, more than any shortfall in either method on its own. A fixed-wing ADS flight gives you a snapshot once or twice a season if the weather cooperates. A monthly scored layer fills the months in between with a read on which stands are progressing and how fast.

Used that way, the two methods aren't competing for the same job. The scored layer tells you where to send a crew and roughly how urgent it is. The crew confirms what's there and writes the paperwork. Districts that treat the layer as a triage tool instead of a replacement for ground work tend to get the sequencing right: salvage the stands already at grey-attack first, flag the red-attack stands moving fast, and leave the green stands for next month's read.

If your district is deciding where to send crews next and the last ADS flight was months ago, see how a monthly scored layer tracks that progression across your monitoring area.

Start a project

Back to the blog