Sanitation harvest vs. salvage harvest: what's the difference?

Both terms show up in the same beetle outbreak, sometimes on the same timber sale, and that overlap is where foresters start mixing them up. Sanitation harvest removes trees that are still infested, before the brood under the bark emerges and spreads to the next stand over. Salvage harvest removes trees that are already dead, to pull merchantable volume off the ground before it degrades. One stops spread. The other recovers value after spread has already happened.
That distinction matters more than it sounds like it should, because it drives two completely different cutting decisions: which trees you mark, how fast you move, and what you're actually trying to accomplish with the harvest.
Sanitation cuts target trees that still carry beetles
A sanitation cut goes after green-attack and current-year red-attack trees, the ones where larvae are still developing under the bark or adults haven't flown yet. Crews pull that wood off the landscape, usually off-site or into a mill yard, before the next flight period turns one infested tree into a dozen newly attacked trees downwind.
Timing is everything here. A sanitation cut that happens after brood has already emerged is just a salvage cut with extra paperwork. Crews working sanitation blocks are racing the beetle's life cycle: the cut window ties to flight timing for the species in question. Merchantable condition doesn't factor into that call. In practice this is the hardest part of sanitation work to schedule, because it depends on knowing which trees are still carrying brood and which have already let it go.
Salvage cuts are about recovering value from trees already dead
Grey-attack trees have already lost their needles and the beetles that killed them have almost always already flown. There's no spread to stop at that point. What's left is a clock on wood value: sapwood blue-staining, checking, and eventual loss of merchantability as the dead tree stands or falls. Salvage harvest is the economic side of the equation, pulling that volume while it still pays for a logger to cut it and a mill to take it.
This is also where the red-attack-to-grey-attack progression becomes the operational question. A stand that's mostly red attack is still a sanitation candidate. The same stand six months later, gone grey, is a salvage call instead. Miss that window and the value keeps dropping until the stand isn't worth harvesting at all. It just gets left as standing fuel.
Why the staging call is the hard part
Most agencies aren't short on the concept here. Foresters know the difference between sanitation and salvage cold. What's hard is knowing, stand by stand across a monitoring area, which ones are still red attack and worth a sanitation call, and which ones have already tipped to grey and need to move to the salvage list before the wood's gone. An aerial survey flight gives you that answer for the day it flew, and ground reports cover whatever a crew happened to walk that week. Neither one gives a standing register you can check against next month to see which stands moved stage and which didn't.
A monthly spectral read on infestation stage is built to close that gap: a scored layer that tracks red-attack to grey-attack progression across the monitoring area, stand by stand, so the sanitation list and the salvage list stay current instead of stale. Bark Beetle Detection builds that register from high-res multispectral imagery, month over month, so the staging call doesn't rest on whatever survey window happened to line up.
If you're trying to keep your sanitation and salvage lists sorted without waiting on the next flight window, see how the monthly scored layer works.